Choosing a WR-22 to 2.4mm Waveguide Adapter for Testing

Millimeter-wave testing demands precision at every connection. Even a slight mismatch between the waveguide and coaxial cable can affect signal performance, lead to inaccurate measurements, and cost valuable testing time. Choosing the right WR22 to 2.4mm adapter helps ensure a reliable connection and consistent results.

At Flexi RF Inc, we talk to test engineers every day, and the same questions come up again and again. Which adapter fits my setup? What should I check before I buy? In this blog, we share what we have learned. We keep it simple, so you can pick the right part with confidence and get back to your measurements.

What a Waveguide to Coax Adapter Does

A Waveguide to Coax Adapter moves your signal from a hollow metal waveguide to a standard coax cable. Most test gear uses coax, while many millimeter wave parts use waveguide. The adapter links the two with very little signal loss.

Why the 33-50 GHz Range Needs Care

At these frequencies, tiny flaws matter. A rough flange or a loose fit can change your readings. Poor matching also adds noise, making it harder to trust your results.

A WR22 to 2.4mm adapter suits this band well. The 2.4mm connector handles up to 50 GHz and mates with common test cables.

Specs to Check Before You Buy

●     Frequency range: Make sure it covers 33-50 GHz.

●     VSWR: A lower number means less reflected signal.

●     Insertion loss: Lower loss means more signal gets through.

●     Flange type: It must match your waveguide, such as UG-383/U.

●     Connector gender: Confirm whether you need male or female.

●     Material and plating: Gold-plated brass holds up well over time.

Mistakes We See Often

●     Ordering the wrong flange type

●     Skipping calibration after adding a Waveguide to Coax Adapter

●     Over-tightening the coax connector

WR22/2.4-UG-K-T Adapter

Our straight adapter is built for lab and field use. Here is what you get:

●     33-50 GHz coverage

●     VSWR of 1.4

●     Insertion loss of 0.5 dB or less

●     2.4mm female connector, 50 ohm

●     UG-383/U flange

●     Gold-plated brass body weighing 28.7 g

●     Operating range of -55 °C to +125 °C

●     RoHS compliant


It works well for military and space, RF communication, test and measurement, and industrial jobs.

Simple Tips for Better Results

  1. Clean the flange and connector before every use.
  2. Tighten the screws evenly.
  3. Use a torque wrench on the 2.4mm connector.
  4. Check for dents or scratches.
  5. Calibrate your setup after you add the adapter.
  6. Store the adapter in a safe case.

Why Test Engineers Choose Flexi RF Inc

We ship in-stock items the same day. Our RF engineers are online to answer your questions. If a standard part does not fit, we also build custom designs. Local pickup is available in Cupertino, California.

Final Thoughts

The right WR22 to 2.4mm adapter keeps your measurements honest. Check the specs, handle it with care, and buy from a team that knows these parts. Visit our website or email [email protected] for a quote.